Facing the problem of “Failed to obtain IP address” is not something very uncommon or unusual. You are not alone in this mess.

This issue is particularly being very bothersome to users of each and every Android mobile phone users and software versions.

This article will let you know in details that why do you face such problems along with the solutions to the issue.

The most important thing here is to know and have a complete understanding of why this menace is taking place.

The “failed to obtain IP address” flaw generally pops up out of nowhere during the retrieval of a Wifi network. It is independent of being new or it is something that you have saved on your Android device.

You will not be able to use the Internet by making the use of that respective Wifi network as long as that muddle is existing on your Android mobile phone or an Android tablet.

There are many Android users who experience the exact same problem but in a bit different manner.

Your Android device might show “Obtaining IP Address”, but it does not actually receive the IP address making the device face no difference.

It’s Usual

The “Obtaining IP Address” error is very much common than you might have been thinking although it occurs not very often, rather very occasionally.

You get to experience this mess because the router you are having cannot allot your Android device an IP address after you have put the password of the wireless connection.

What your android device will try to do now is try to get connected with the wifi network once more to check whether it can receive the IP address it could not get at the first try.

The device will be continuing to do the same thing again and again until and unless it can get linked with the Internet with that particular wireless network. And, the worst part of this problem is this will continue happening, it will not get solved and can go on and on for hours.

Causes

Before we get into the procedure to get rid of the problem you need to know what are the possible causes of this problem. Here, let us get started with the very common cause that causes the “Failed to obtain IP address” error.

One of the most plausible reasons for this fault is that a small mistake in the password you are typing. The password should match and that is very obvious.

Be careful about the spaces, underscores if there are any such character present in the password. Also, check the cases you are using while filling in the password section.

The third character of the password might be in a capital letter but you are typing that in small and so you will get to face this problem.

There is another reason that can be very much possible to occur while you are trying to connect your device with a wifi network.

Your network may experience some particular problems and that is why the router you are using fails to provide the IP address to your Android device.

You also bear the chance of receiving an error notification if the signal of the router is too weak to catch. In case the maximum number of gadgets the route can communicate with are connected with the network, the router will not be able to possess an IP for your Android device.

The Tricks

Now, let us head in with the steps to fix the “failed to obtain IP address” error. There are many reasons for the evolution of this muddle but there are many tips and tricks to get rid of this problem without much effort. Also, these tweaks can help you to have a permanent solution to this error.

The First Thing You Need to do is Forget the Network. 

This is the first procedure you can try out for solving the problem of “failed to obtain IP address” error. These steps are actually pretty easy and straightforward.

Sometimes even these steps are the only stuff that you need to perform to get rid of this complication.

  1. Open the settings application from the main menu.
  2. Select the option “Network & Internet.”
  3. The next step is to select the “WiFi” option.
  4. Then, you have to press on the network you are failing to connect to.
  5. Now, you have to select the “Forget network” option.
  6. Finally, you will be logging into the Wi-Fi network again.

Restart the Router

There are cases where you will find that the router is getting heated if it is turned on for a very long time.

But, this is something that does not happen quite often and this can be one of the reasons for the IP address obtaining failure by your Android device.

In such a case, you can solve this problem by turning off the router for some time and then turn the router back on again.

Most of the routers possess a reset button and you can disconnect the device and plug it in again. This might get you the problem resolved.

Renaming the Device

Many users have come up with a complaint against this particular issue we are discussing about.

They have also claimed that you can get to the bottom of this issue and solve this just by renaming the android device you are trying to connect to the wireless network, its that simple.

The steps to do this work are as simple as a piece of cake and why not give it a go? Here are the steps to rename your Android device.

  1. The first thing is obviously to go to the Settings option from the main menu of your Android phone or tablet.
  2. Now, go to the “About phone” option. Open it.
  3. The next thing is to look for the “device name” panel and tap on it.
  4. Delete the name of the device that was there originally and type the new name, any name you are willing to give.
  5. Then, hit on the Ok button.
  6. Now, try again to reconnect your device with your router.

Turn on and Turn off the Airplane Mode

This, you can say, one of the most traditional solutions to this kind of problem. This is something you guys might have applied at least once in your lifetime to solve a problem like losing your mobile network.

This method is widely followed by a maximum number of users because doing this task use pressure on the router for the reconfiguration of your wireless connection.

What you need to do here is just turn on the airplane mode on your device, wait for a few seconds and then, turn off the airplane mode.

This method is something that has a greater chance of giving a solution to the “Failed to obtain IP address” error.

Using WPA2-PSK Encryption

There are some particular types of encryption that causes the problem and do not work very well for the devices.

These kinds of encryptions are inclusive of AES and TKIP. If you find out that you are not being capable of connecting your Android device, you can just go to the wireless settings to change the encryption to WPA2-PSK.

Checking if the MAC Filter is Active

There are instances where the executives of WiFi frequently use MAC addresses to explicitly permit or ban devices on their network.

Your device is not getting connected with the network for sure if your device is not on the whitelist or to be simple is banned by the Wifi Admin.

Okay, so here is a solution to this and that is, you can turn off the MAC filter. Another option to get rid of this issue is to eliminate your device from the blacklist.

You also get another choice for this problem and that is to add your Android device to the whitelist.

Put a Static IP Address

Let me get you directly to the steps here.

  1. Open the Settings option menu.
  2. Tap on “Network & Internet.”
  3. From “Wifi” long-press on the network causing the problem.
  4. Choose “Modify network.”
  5. Select “Show advanced options” > “IP address” > “Static.”
  6. With any number from 1 to 225, change the last number of the IP address
  7. Try connecting.

Cleaning Google Play Services Cache

This method is something that has been in the troubleshooting processes for solving many problems on Android devices.

Go to Settings > Apps & notifications > Google Play Services > Storage > Clear cache. Then, try to connect with the router again.

Resetting Factory Data

If the previous tricks and does not show the desired result, this is the only procedure that remains at the end.

This will be bringing your phone to the original state as it was during the purchase. For doing this task you need to go to Settings > System > Advanced options > Reset options > Erase all data (factory reset) > Reset phone.

Wrapping up

If you go for any of these fixation tricks, you will surely be getting rid of the “Failed to obtain IP address error”.

I hope this article was handy enough. Let us know in the comments if any of these helped you. Visit our other articles and do not forget to have a look at our other articles.

Leave a Reply

Your email address will not be published. Required fields are marked *